Handleiding
Je bekijkt pagina 35 van 163
ENGLI SH
33
There are two power supply plugs on the back of the Minibar (K SMART - K ECOSMART).
- Connect the “POWER” plug to the socket in the room specically for the Minibar (socket not
connected to the energy saving system).
- Connect the “SIGNAL” plug to any socket connected to the energy saving system (Energy
saver).
NOTE: The K Ecosmart Minibar operates in STANDARD/TIMER mode where the “SIGNAL” plug
is not connected. Standard mode refers to operation not relative to identication of the Guest
in the room and operation which is regulated by the temperature selected by the Client using
the switch described above.
ATTENTION!
If the POWER and SIGNAL cables are connected in reverse, the fridge will operate whilst the
guest is in the room and will switch itself o when the guest leaves the room.
To conrm that the connection is correct, check that the light illuminates when opening the
Minibar door subsequent to checking that:
1) the energy saving system (Energy saver) is not functioning and that the smart card has not
been inserted
2) the Minibar is on (the temperature switch at the front of the Minibar must not be in position
“0”).
In the instance that the light does not illuminate, invert the connection of the two power cables.
Bekijk gratis de handleiding van Indel B K 20 ECOSMART PV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Indel B |
| Model | K 20 ECOSMART PV |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 17352 MB |
