Handleiding
Je bekijkt pagina 52 van 60
PAGE 52
Troubleshooting (Continued)
Replacing the oven light bulb
WARNING: Ensure that the appliance is switched
off before replacing the lamp to avoid the
possibility of electric shock
If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained
f
rom the after-sales service or from specialist
retailers. Please specify the SN number
of your appliance. Do not use any other type
of bulb.
Proceed as follows:
1.
Switch off the relevant circuit breaker.
2.
Open the appliance door.
3.
Lay a tea towel in the cooking compartment if it is
cold to prevent damage.
4.
Unscrew the glass cover from the bulb inside the
cooking compartment by turning it anti-clockwise.
5.
Replace the bulb with one of the same type.
Voltage: 230 V
Power: 25 W
Thread: E14
Temperature resistance: 300°C
6.
Screw on the glass cover again.
7.
Remove the tea towel and switch the circuit
breaker back on.
Turn the oven switch or your control panel in
position
in order to check whether the
oven lighting is working properly.
55
Bekijk gratis de handleiding van InAlto RU9EIB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | RU9EIB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6219 MB |
