Handleiding
Je bekijkt pagina 28 van 60
PAGE 28
indicator shows “00 “ when the setting time
finished.
Setting the timer to turn cooking zones off
If the timer is set on one zone:
1. Touching the heating zone selection control
that you want to set the timer for.
2. Touch timer control , the “10” will show in the
timer display. and the “0” flashes.
3. Set the time by touching the slider control. (e.g. 6)
4. Touch timer control again, the “1” will flash.
5. set the time by touching the slider control (e.g.9),
now the timer you set is 96 minutes.
6. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
7. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
I
f
the timer is set on more than one zone:
1.
When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the
min. timer. The dot of the corresponding zone flashes.
30
Operating the Cooktop (Continued)
Bekijk gratis de handleiding van InAlto RU9EIB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | RU9EIB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6219 MB |
