Handleiding
Je bekijkt pagina 23 van 40
23
For Minor Faults
Problem Possible Cause Solution
The cooktop cannot
be turned on.
No power is going to the cooktop. • Ensure the cooker is connected to
the power, and is switched on.
• Check if there is a power outage
in your home or area. If the
problem persists contact our
Support Team for guidance.
The touch controls won’t
respond, or are dicult
to operate.
The controls may be locked, or there
may be a slight film of water on the
controls, or you may be using the
tip of your finger as opposed to the
pad when touching controls.
• Unlock the controls, see page 15.
• Make sure the touch controls are
properly dry, and to use the pad of
your finger rather than the tip.
The cooktop has been
scratched.
Rough-edged cookware, or
unsuitable cleaning products such
as an abrasive scourer may have
been used on the cooktop.
• Use cookware with flat and
smooth bases. See page 12.
Some of my cookware makes
crackling or clicking noises.
This may be caused by the
construction of your cookware, as
dierent layers of metals vibrate.
• This is normal for cookware to
make these noises, and does not
indicate a fault.
There is a low humming noise
when using high heat settings.
This is caused by the electronic
technology of induction cooking.
• This is normal, the noise will lessen
for lower heat settings.
There is a fan noise coming
from beneath the cooktop.
A cooling fan built into your cooktop
has activated to prevent the
electronics from overheating.
• This is normal, however it is
important that you don’t shut the
power o while the fan is running.
Cookware does not become
hot and the display shows the
‘ ’ symbol.
The cooktop cannot detect the pan
either because it is not suitable for
induction cooking, or it is too small
for the zone it has been placed on.
• Use cookware suitable for
induction cooking, see page 16.
• Use the right size pan for zones.
The cooktop, or one of
the zones has turned o
unexpectedly, and a tone is
sounding alongside an error
code on the display.
This may be the result of a technical
fault. To identify the fault code and
its meaning, read the table on Fault
Codes found on page 18.
• Please note down the error letters
and numbers, switch o the
power from the wall and contact
our Support Team by dialling
1300 11 4357 or by emailing us at
support@residentiagroup.com.au
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob.
Cooktop Troubleshooting (Continued)
Bekijk gratis de handleiding van InAlto IU9EIB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IU9EIB2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4419 MB |
