Handleiding
Je bekijkt pagina 21 van 32
21
CLOCK/PROGRAMMER
Button 1: Decrease (-)
Button 2: *clock → alarm setting → duration
setting → end time setting → clock
setting →*clock (*:default)
Button 3: plus (+)
Set alarm
1. Press button 2, alarm icon flashing means alarm
function chosen. “0:00” will display.
2. Press button 1 and 3 to set alarm time.
Time adjust range is “1:00–99:00”.
Press once to plus or minus 1, and hold for 3 seconds
for quick-adjust. Waiting for 5 seconds to confirm
setting, the alarm icon will be display, alarm time will
be shown and alarm starts.
3. After the count down, “0:00”will display, buzzing
starts 4 times every 5 seconds.
Press any button to stop.
4. If there’s no operation for 7 minutes, buzzing
will stop.
Duration setting
1. Press button 2, choose ‘duration’ function, duration
icon will flash, “0:00” will display.
2. Press button 2 and 3 to set duration time, adjusting
range is “0:01~23:59”. Press once to plus or minus 1,
hold for 3 seconds for quick adjust.
3. The flashing will last for 5 seconds, so the settings
must be done within this time frame or the time of
day will show again. After setting, the duration icon
will display, counting down starts.
4. When counting down stops, power will turn o,
‘Duration’ icon will flash, “0:00” will display, buzzing
will starts for twice every 5 seconds. Press any button
to stop buzzing, and press button 2 to show the time
of day.
5. During the cooking duration, press button 2 can
check and change the cooking time. After counting
down stopping, if there’s no operation for 2 minutes,
buzzing will stop.
6. If set duration time before end time, end time can
only be added, not decreased. (The max time added
can be after 23h 59m. When end time is longer
than duration time+ current time, end time can be
decreased by pressing button 1. It will be decreased
until end time equals to duration time+ current
time+1 minute). If end time is longer than duration
time+ current time, power will be o, end time
icon will display. When end time equals to duration
time+current time, power will be on again, end time
icon will turn o.
Time function
1. Press button 2 to choose time function. Time icon will
flash, press button 1 or 3 to time. The range is 24hrs.
2. Press once to plus or minus 1, hold for 3 seconds for
quick-adjust. No operation for 5 seconds, the time of
day will show, time icon will turn o.
3. If time setting is changed after setting alarm,
duration and end time, the alarm will not be
changed, and duration and end time will reset.
Other notification
1. If setting alarm, duration time and end time, alarm
time will display, and alarm, duration, end time icons
will display.
2. After setting alarm, duration, and end time, Button
2 can be pressed to check and change alarm time,
duration time, end time and day time.
3. If duration time is later than alarm time, there will
be only buzzing for alarm. If duration is earlier than
alarm time, there will be only buzzing for alarm.
Operating Your Oven (Continued)
Bekijk gratis de handleiding van InAlto IU9EEB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IU9EEB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3993 MB |
