Handleiding
Je bekijkt pagina 16 van 32
16
For Serious Faults:
• Some minor faults can be fixed by referring to the
table on page 17, however if an emergency or serious
fault occurs, immediately set all controls to their o
positions and disconnect the power from the source.
• If a serious fault occurs, DO NOT attempt any repairs
yourself, instead wait for a service agent to do so.
• For assistance or to organise an authorised service
agent contact our After Sales Support by calling
1300 11 4357, or by emailing support@residentiagroup.
com.au.
For Serious Faults:
• Please note that if a service agent is asked to attend
whilst the product is under warranty and finds that
the problem is not the result of an appliance fault,
then you may be liable for the cost of the call out
charge.
• The appliance must be accessible for the service
agent to perform any necessary repair. If your
appliance is installed in such a way that a service
agent is concerned that damage will be caused to the
appliance or your kitchen, then they will not complete
a repair.
• Refer to the Warranty Information to learn more.
Cooktop Fault Codes & Solutions
Fault Code Possible Cause Solution
‘
f¡
’ or ‘
f6
’
The cooktop may have experienced a
temperature sensor failure.
• Take note of the fault code and please call
our Support Team by dialling 1300 11 4357 or
email at support@residentiagroup.com.au
• To avoid any damage to the appliance, risk
of bodily harm or property damage, do not
attempt to carry out any repairs yourself,
instead wait for a service agent.
‘
f9
’ or ‘
Fa
’
There has been a temperature sensor
failure for the cooktop’s IGBT (Insulated
Gate Bipolar Transistor).
‘
FC
’
The connection between the display board
and main board has failed.
‘
e¡
’ or ‘
e2
’
The cooktop may be receiving an abnormal
supply voltage.
• Please ensure that the power
supply is as recommended.
‘
e3
’ or ‘
e4
’
The temperature sensor within the
cooktop is experience higher than normal
temperature levels.
• Please allow the cooktop to fully cool down
before restarting it.
• However if the problem persists, please call
our Support Team by dialling 1300 11 4357 or
email at support@residentiagroup.com.au
‘
e5
’
The IGBT temperature sensor within the
cooktop is experience higher than normal
temperature levels.
Note: These fault codes wll only appear if an abnormality or fault occurs. In such an occurrence, the cooktop will
enter
a protective state and display one of the relevant fault codes as listed above. Do not ignore these codes if they
appear.
Cooktop Troubleshooting
Bekijk gratis de handleiding van InAlto IU9EEB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IU9EEB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3993 MB |
