InAlto ITLW10WG handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 28
10
Installation Instructions (Continued)
6. Release the bushing to lock the hose in place.
NOTE: After installation, turn on the tap and check
carefully for any water leaks at the connection point.
Screw Tap
Specialised washing machine tap
Levelling the appliance
WARNING:
The lock nuts on all four feet must be screwed tightly
against the housing.
1. Check if the legs are closely attached to the cabinet.
If not, please turn them to their original positions
tighten the nuts.
2. Check alignment of the product with a spirit level and
if required, correct.
3. Loosen the lock nut and turn the feet until it closely
contacts with to the floor.
4. After being locked properly, press four corners again
to make sure that they has been
adjusted properly.
inalto.house 09
SELECTION OF TAP
Please select appropriate tap.
CONNECTION OF INLET HOSE, TAP AND WASHING MACHINE
1. Connection between ordinary tap and inlet hose.
2. Connection between screw tap and inlet hose.
Ordinary faucet
a) Loosen clamp nut
to show 5mm thread
tap with threads and inlet hose
e) Press slide bushing,
insert inlet hose into
connecting base
b) Loosen four bolts
special tap for washing machine
f) Connection nished
c) Set connecting base
on tap and tighten
bolts evenly
g) After connection and installation,
check if there is water leakage
d) Tighten clamp nut
Screw tap Special washing
machine tap
inalto.house 09
SELECTION OF TAP
Please select appropriate tap.
CONNECTION OF INLET HOSE, TAP AND WASHING MACHINE
1. Connection between ordinary tap and inlet hose.
2. Connection between screw tap and inlet hose.
Ordinary faucet
a) Loosen clamp nut
to show 5mm thread
tap with threads and inlet hose
e) Press slide bushing,
insert inlet hose into
connecting base
b) Loosen four bolts
special tap for washing machine
f) Connection nished
c) Set connecting base
on tap and tighten
bolts evenly
g) After connection and installation,
check if there is water leakage
d) Tighten clamp nut
Screw tap Special washing
machine tap

Bekijk gratis de handleiding van InAlto ITLW10WG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkInAlto
ModelITLW10WG
CategorieWasmachine
TaalNederlands
Grootte2149 MB