Handleiding
Je bekijkt pagina 23 van 30
23
Problem Possible Cause Solution
The oven is not turning on. There may be a
break in the power
supply.
Check the household fuse box for any blown fuses and replace as
necessary. Also ensure that a safety switch
hasn’t tripped.
The oven light is not
working.
The light globe
may be loose or,
has blown.
When the oven has cooled and is switched o, remove the globe
cover and ensure that the globe is tightly secured.
If blown, refer to the Cleaning & Maintenance chapter under the
Bulb Replacement section.
The oven is burning the
top of my dish whilst the
underside is under-done.
Not enough heat
is emitting from
the bottom of the
oven cavity.
Try using the Conventional cooking functions.
Try lowering the temperature.
Try using a lower shelf position.
The oven is burning the
underside of my dish whilst
the top is under cooked.
Excessive heat
is emitting from
the bottom of the
oven cavity.
Try using the Conventional cooking functions.
Try lowering the temperature.
Try using a higher shelf position.
The oven is burning the
outside of my dish whilst
the inside is under-done.
The temperature
is set too high.
Lower the oven temperature and increase the cooking duration.
The outside of my dish
is too dry even though it
looks cooked.
The temperature
is set too low.
Increase the oven temperature and decrease the cooking duration.
HE1 fault code appears in
the display.
Temperature
sensor error.
To organise an authorised service agent, please contact our
After Sales Support by calling 1300 11 4357, or by emailing
support@residentiagroup.com.au
HE2 fault code appears in
the display.
Probe temperature
sensor error.
To organise an authorised service agent, please contact our
After Sales Support by calling 1300 11 4357, or by emailing
support@residentiagroup.com.au
For Minor Faults
Troubleshooting
For Serious Faults
Some minor faults can be fixed by referring to the table
above, however if an emergency or serious fault occurs,
immediately set all controls to their o positions and
disconnect the power from the source.
If a serious fault occurs, DO NOT attempt to repair the oven
yourself, instead wait for a service agent to do so.
For assistance or to organise an authorised service agent
contact our After Sales Support by calling 1300 11 4357,
or by emailing support@residentiagroup.com.au.
Please note that if a service agent is asked to attend whilst
the product is under warranty and finds that the problem is
not the result of an appliance fault, then you may be liable
for the cost of the call out charge.
The appliance must be accessible for the service agent to
perform any necessary repair. If your appliance is installed in
such a way that a service agent is concerned that damage
will be caused to the appliance or your kitchen, then they
will not complete a repair.
Please refer to the Warranty Information to learn more.
Bekijk gratis de handleiding van InAlto IO9060XL10T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IO9060XL10T |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3185 MB |
