InAlto IFLW900B2 handleiding
Handleiding
Je bekijkt pagina 12 van 32
12
Operating Instructions (Continued)
WASHING CLOTHES FOR THE FIRST TIME
Before washing any clothes, please perform one cycle
without clothes inside as follows:
• Connect the power source and water.
• Insert a small amount of detergent into the
detergent drawer and close it.
• Select a Cotton program at 90°C.
• Press the “Start/Pause” button on the appliance.
• Allow the program to complete and your washing
machine is now ready for use.
SELECTING A PROCEDURE
You should select you washing program based on
the type of clothing, quantity and dirtiness level, in
combination with the following temperature table.
Temperature Mode Application
90º C
Seriously soiled clothing, pure white
cotton (I.e. bed linen, towels, table
cloths, etc)
60º C
Moderately soiled clothing, cotton
and synthetic articles with certain
decolourising degree (I.e. shirts,
pajamas, etc)
40º C, 30º C,
20º C, Cold Water
Lightly soiled clothing, synthetics
and wool
To select a program:
• First turn the Program Selection Dial to the
corresponding wash program, according to the
type of textiles being washed.
• Secondly, select the desired temperature based on
the level of dirtiness.
• Note: Generally the higher the temperature, the
more power that’s consumed.
• Finally, select your desired spin speed. The higher
the spin speed, the drier the textiles will be at
completion, however more delicate textiles will be
more wrinkled. Delicate textiles should be set with
a lower spin speed.
Selecting the main washing program depend on the
types of clothing to be washed, as follows:
Steam Wash
Select this function for steam-assisted washing.
The higher temperature makes it easier to break down
stains more effectively, getting rid of allergens and
bacteria whilst also reducing the need to iron wrinkles
in clothing.
Cotton
Suitable for hard wearing and heat resistant textiles
made from cotton or linen. To increase the washing
results the main washing time is increased.
Synthetic
The procedure is shorter compared with that for
cottons and the washing intensity is relatively gentle.
It is recommended for washing synthetic articles, for
example: shirts, coats, etc.
Mix Load
You can select this procedure for washing durable
clothes, that typically require more wash time and
intensity. It is ideal for any “daily” clothing such as
cotton, including sheets, pillowcases, bathrobes and
underwear.
Denim
Suitable for durable garments such as denim.
ECO Wash
This procedure saves energy and limits the washing
temperatures between 20°C–60°C. The default set
temperature is 20°C. Use with a small quantity of
clothes which are only lightly dirty.
20° C
You can select this procedure for washing delicate
items where the care label suggests Cold Wash.
To be used with only a small quantity of clothing at
a time with light soiling only. The default temperature
of this washing procedure is 20° C.
Spin Only
This procedure provides a spin only option. Residual
soapy water shall be drained out before spinning.
Rinse & Spin
This procedure provides a short rinse cycle followed by
a spin cycle.
Bekijk gratis de handleiding van InAlto IFLW900B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IFLW900B2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2790 MB |
