InAlto IFLW800W2 handleiding
Handleiding
Je bekijkt pagina 19 van 32
19
Cleaning & Maintenance (Cont)
CLEANING THE INLET FILTER
You should clean the inlet filter every 3 months, or if
you find that insufficient water is being supplied to your
washing machine when the supply tap is open.
To clean the inlet filter:
• Close the water supply tap and remove the water
supply hose from it.
• Clean the filter a brush.
• Unscrew the water supply hose from the rear of the
machine. Pull out the filter with long pliers.
• Use a brush to clean the filter.
• Reinstall the filter to the water inlet and reconnect
the water supply hose.
CLEANING THE DRUM PUMP FILTER
(REMOVING FOREIGN OBJECTS)
WARNING: To avoid the risk of an electric shock,
always remove the power plug from the power
outlet before cleaning the Drain Pump filter.
Periodically you should clean the drain pump filter to
ensure normal operation of your washing machine.
The type of washing, frequency and soil level of your
washing cycles will alter how often this procedure
needs to be undertaken, however you should inspect
the filter regularly.
Should your washing machine not empty and/or spin,
or your machine makes unusual noises during
operation, your Drain Pump filter could be blocked.
Follow this procedure to check or remove any
foreign objects.
• After disconnecting the power, open the filter cover
at the front base of your washing machine.
• Unscrew the filter in an anti-clockwise direction and
remove any foreign objects.
• Re-install the filter and close the service panel.
Leaking my occur if it is not re-installed correctly.
WARNING: Never remove the pump cover when the
washing machine is in operation, always wait until
the appliance has finished and the is empty. There
can be hot water within the pump, so be careful to
avoid burns, should it have operated recently. When
replacing the cover, be careful to ensure it is closed
securely.
MAINTENANCES
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
6. Clean the Inlet filter every 3 months
to ensure the normal operation of the
appliance.
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter need to be cleaned.
Note!
Clean The Detergent Dispenser
• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the
appliance.
Press the “A” and
remove the dispenser
drawer
Clean the dispenser
drawer and the softener
cover under water
Clean the recess with
an soft brush
Insert the dispenser
drawer
Note!
1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
1 2
3 4
1
3
4
2
A
23
MAINTENANCES
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
6. Clean the Inlet filter every 3 months
to ensure the normal operation of the
appliance.
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter need to be cleaned.
Note!
Clean The Detergent Dispenser
• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the
appliance.
Press the “A” and
remove the dispenser
drawer
Clean the dispenser
drawer and the softener
cover under water
Clean the recess with
an soft brush
Insert the dispenser
drawer
Note!
1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
1 2
3 4
1
3
4
2
A
23
Bekijk gratis de handleiding van InAlto IFLW800W2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | IFLW800W2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2790 MB |
