Handleiding
Je bekijkt pagina 7 van 26
07
Prior to Beginning Installation
• Make sure to check the condition of the appliance after
unpacking it. Do not continue with installation if it has
been damaged during transport.
• Safe operation of this appliance can only guaranteed
if it has been professionally assembled and installed
in accordance with these instructions by a qualified
technician. The individual who assembled and installed
the appliance is liable for damages or faults resulting
from an incorrect assembly or installation.
• IMPORTANT: Installation and maintenance must be
carried out by an authorised service agent or similarly
qualified technician.
• Ensure power to the appliance has been shut o before
carrying out any installation or maintenance.
• It is vital that the appliance is properly earthed before
completing the installation process.
• If a rangehood is to be fitted, follow the installation
guidelines supplied with the rangehood.
General Installation Warnings
• The appliance must be installed by a licensed electrician.
• Please never try to modify or repair the appliance
by yourself.
• The appliance should be installed
with adequate ventilation.
• A certificate of compliance must be supplied by the
Installer and is to be kept by the customer.
• The packing materials must be removed before
you install the cooker.
• You must follow the installation instructions
in this user manual.
• The surrounding kitchen cabinets must be able to
withstand 100ºC.
• The appliance must not be installed in a corner. It must
be installed at least 100mm from the side wall.
• Do not obstruct the vents, openings and air spaces
on the appliance.
• The anti-tilt plate must be installed
to avoid accidental tipping.
• The stabilising bolt must be installed to avoid
accidental moving.
• You must not pull or lift the appliance
by the door handles.
• A suitable isolating switch providing full disconnection
from the mains power supply must be incorporated in
the permanent wiring. The switch must be mounted
and positioned to comply with the local wiring rules and
regulations. The isolating switch must be of an approved
type and provide a 3 mm air gap contact separation in
all poles (or in all active [phase] conductors if the local
wiring rules allow for this variation of the requirements).
The isolating switch will be easily accessible to the
customer with the oven installed.
• If the supply cord or cable is damaged, it must be
replaced by an approved service agent or a similarly
qualified person in order to avoid a hazard.
• According to the electrical safety regulations, the
appliance must be properly earthed.
Positioning the Appliance
• Keep Area Free of Hazards: Ensure there are no
combustible or flammable materials (e.g. curtains)
near the installation area.
• Heat-Resistant Surroundings: Any furniture or cabinetry
adjacent to the cooker must be constructed from
materials resistant to temperatures over 100°C.
• Follow Clearance Guidelines: Position surrounding
furniture, cabinets, and extractor fans according to the
safety clearances shown in Figure 1.
Minimum Clearance Dimensions
• Side Clearance (each side): 65 mm minimum
• If using a rangehood, the overhead clearance (above
cooktop surface) must be a minimum of 650 mm.
• If no rangehood is fitted, the minimum distance between
the cooktop surface and any cabinetry or other structure
must be a minimum of 750 mm.
• Height of surrounding cabinets (with a rangehood):
400 mm minimum from cooktop surface
Ventilation
• Ensure at least 2 cm of space between the rear of the
cooker and the back wall for adequate ventilation and air
circulation.
Installation Instructions
Bekijk gratis de handleiding van InAlto I54DOCEW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | InAlto |
| Model | I54DOCEW |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2472 MB |
