Handleiding
Je bekijkt pagina 28 van 68
28
Before the rst use
Induction
Adjuster (Knob)
Switching on a cooking
area
Switching off a cooking
area
Automatic switching off
of the device
*
Clean your hob with a damp cloth, and then dry the surface thoroughly.
There is a coil underneath each cooking zone which, when a pot is placed on it,
generates a variable electromagnetic eld, producing inductive power of a
ferromagnetic substance on the bottom of the pot. The end result is that the bottom
of the pot placed above the cooking zone is heated. The type of material constituting
the pot is fundamental:
- All pots with a ferromagnetic bottom are suitable (this can be veried with a magnet)
- The following pots should not be used: copper, stainless steel, aluminum, glass,
wood, ceramics
The cnob does not show any numbers, the power level will be visible on the display.
Turn the relevant knob clockwise. On the hob display the set power level will appear
(from 1 to 9)
A cooking area is switched off by turning the respective knob counterclockwise. The
symbol [0] appears on the hob display for 15 seconds, then it disappears from the
display or changes to the symbol [H] if the cooking area is still hot.
The device switches off automatically if any conditions of excess temperature or errors
in the power supply occur.
INSTRUCTIONS FOR USE
– Use of the induction hob
Pot of magnetic material
Induction hob
Electromagnetic coil
Bekijk gratis de handleiding van Ilve PD106NE3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ilve |
| Model | PD106NE3 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9223 MB |
