Handleiding
Je bekijkt pagina 12 van 32
12
CLEANING AND MAINTENANCE
GREASE METAL FILTERS
These lters are usually made in aluminium or stainless steel,
and their main purpose is to block the particles of oil and
fat suspended in the cooking fumes. An excessive accu-
mulation of grease inside the lters could cause unplea-
sant smells and decrease the suction power of the hood.
Please note that accumulated fat is highly ammable: any
re could lead to severe damage to both users and the
product.
For these reasons, the anti-grease lters should be washed
at least once a month, immersing them into hot water and
dish soap for at least one hour. Rinse with plenty of water
and wait for the lters to be fully dry before putting them
back in place. Please note that the maximum temperature
is 70°C/158°F: higher temperature can cause darkening in
the metal (please note that this DOES NOT impair the ope-
ration of the lter).
For their removal see Fig. 5
ACTIVE CARBON FILTERS
These lters cannot be washed or regenerated, and should
therefore be replaced every 3 to 4 months, depending on
the hood usage. Damp environments, high temperature,
soiled anti-grease lters and the use of an induction hob
could result into an accelerated decay of the lters. Roun-
ded lters can be removed by counter-clockwise twisting.
For the instructions on carbon and anti-grease lters
removal, see Fig.6
Internal recirculation hoods have to be used only with
active carbon lters installed.
Fig. 6
Fig. 5
Fig. 6
Fig. 5
1
2
Bekijk gratis de handleiding van Ilve AGQ80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ilve |
| Model | AGQ80 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3967 MB |
