Handleiding
Je bekijkt pagina 11 van 24

Symbol Description
o position
Symbol Description
there is maximum gas sup‐
ply / ignition setting
there is minimum gas sup‐
ply
to show the position of the
burner
Daily use
Warning! Refer to Safety
chapters.
Ignition of the burner
Always ignite the burner before
you place the pots or pans.
To ignite the burner:
1. Push the control knob and turn it
anticlockwise to the maximum position
marked with .
2. Keep the control knob pushed for about
5 sec. As a result, thermocouple heats
up, and the safety device switches o. If
you do not push the knob, the gas supply
is interrupted.
3. When you light the ame, you can adjust
it.
If the burner does not ignite, after
a few attempts, check if the crown
and its cap are in correct
positions.
1
2
3
4
5
1
Burner cap
2
Burner crown
3
Injector
4
Thermocouple
5
Ignition candle
Warning! Do not keep the control
knob pressed for more than 15
seconds. If the burner does not
light after 15 seconds, release the
control knob, turn it into the o
position, and wait for at least 1
minute before trying to light the
burner again.
ENGLISH 11
Bekijk gratis de handleiding van IKEA VASASTAN 205.236.06, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | IKEA |
Model | VASASTAN 205.236.06 |
Categorie | Fornuis |
Taal | Nederlands |
Grootte | 1886 MB |