Handleiding
Je bekijkt pagina 6 van 92
6
Technical data
Model name RODULF si/st desk 140x80
Typenumber RODULF-GF-470
Input 100–240 V AC 50/60 Hz, 3.2-1.5 A
Standbypowerconsumption <0.1 W
Temperatureintervalatusage: 50–104 °F or 10–40 °C
Temperatureintervalatstorage: 0–158 °F or -18–70 °C
Operatinghumidity 20–90 % RH at 40 °C
Soundlevel: <50 dB(A)
Heightsettinginterval: 68–115 cm or 26.8–45.3 inches
Maximumload: 70 kg or 154 lb
Troubleshootingguide
NOTE!
Do always disconnect the cable from the wall socket before maintenance!
Symptom Check Try
The desk does not move.
Make sure that all cable are
connected.
Connect the cables.
Follow installation instructions
and perform a reset.
Unplug the desk from the wall
socket for roughly 1 minute and
reconnect.
Only one column is moving.
Perform a reset. If there’s still
only one column moving, replace
the column that is not moving.
The columns are moving at
dierent speeds.
It is possible to move the slower
column by pulling/pushing.
Replace the column that is
moving slower.
It is not possible to move the
slower column by pulling/
pushing.
Replace the column that is
moving faster.
The desk only moves short
distances.
Make sure that the desk is not
overloaded.
Unload the desk. If the problem
remains, replace the control box.
The desk stops and reverse
during operation.
Make sure that nothing is
blocking the desk movement.
Remove the obstacle. If the
problem remains replace the
whole underframe.
The desk is not able to drive all
the way up or all the way down.
Check all connections.
Perform a reset.
The desk can only drive in one
direction (up or down).
The desk is not horizontal.
Bekijk gratis de handleiding van IKEA RODULF 004.973.78, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | RODULF 004.973.78 |
| Categorie | Bureau |
| Taal | Nederlands |
| Grootte | 9998 MB |
