IKEA ÖSTVEDA 105.681.48 handleiding
Handleiding
Je bekijkt pagina 9 van 44
ENGLISH 9
Water connection
The appliance must be connected to the
water mains using new hose-sets. The old
hose-sets should not be reused.
• The inlet and drain hoses can be directed
to left or right.
The dishwasher can be connected to
either cold or hot water, as long as it is
no hotter than 60°C.
• Water pressure must be between 0,08 MPa
and 1 MPa.
• The inlet hose must be connected to a tap
so that the water supply can be cut off
when the machine is not in use (fig.1).
• The dishwasher is fitted with 3/4" threaded
connector (fig.2).
• Connect inlet hose "A" to water tap "B" with
a 3/4" attachment making sure that it has
been properly tightened. For nordic
countries (FI SE NO DK) there is necessity to
use adapter (see assembly instruction).
• If it is necessary, the inlet pipe can be
lengthened up to 2,5 m. The extension
pipe is available from the After Sales
Service Centre.
Bekijk gratis de handleiding van IKEA ÖSTVEDA 105.681.48, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | ÖSTVEDA 105.681.48 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4787 MB |
