Handleiding
Je bekijkt pagina 28 van 96
ENGLISH 28
Residual heat indication
After the switch off of a heating zone or the
complete stop of the hob, the heating zones
are still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating
zones may be touched without danger.
As far as the residual heat indicators are on
light, don’t touch the heating zones and don’t
put any heat sensitive object on them. There
are risks of burn and fire.
Booster function
Booster [ P ] grant a boost of Power to the
selected heating zone.
If this function is activated the heating zones
work during 10 minutes with an ultra high
Power. This is foreseen for example to heat up
rapidly big quantities of water, like nuddles.
Start up / Stop the Booster:
Action
Control panel
Display
Switch on
cooking
zone
Press cooking zone
“On/Off” key
[ ON ]
Start up the
Booster
Slide to the end of the
“SLIDER” or press
directly on the end of
the “SLIDER”
[ P ]
S
top the
Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
Power management:
The hole cooking hob is equipped with a
maximum of Power. When the Power function
is activated, and in order to exceed the
maximum Booster, the electronic system
orders to reduce automatically the power level
of an other heating zone. The display is
blinking on [ 9 ] during a few seconds and
then shows the maximum of power allowed:
Heating zone
selected
The other heating zone:
(example: Booster level 9)
[ P ] is
displayed
[ 9 ] goes
to [ 6 ] or
[ 8 ] depend-ing the type of
zone
Timer
The timer is able to be used simultaneous with
all heating zones and this with different time
settings (from 0 to 159 minutes) for each
heating zone
.
Setting and modification of the cooking
time:
Ac
tion
Control panel
Display
Switch on
cooking zone
Press cooking zone
“On/Off” key
[ ON ]
Select the
power level
Slide on the
“SLIDER“
[ 1 ] to [ P ]
Select the
Timer
Press
simultaneously key
[ - ] and
[ + ] from the timer
until the desired
display is on
Timer
display on
Decrease the
time
Press key [
-
] from
the timer
[ 60 ] to
59, 58...
Increase the
time
Press key [ + ] from
the timer
Time
increase
After a few seconds, the [ min ] display stops
with blinking.
The time is confirmed and the timer starts.
To stop the cooking time:
Action
Control panel
Display
Select the
Timer
Press
simultaneously key [ -
] and
[ + ] from the timer
until the desired
display is on
Timer
display on
Stop the
time
Press key [
-
] from
the timer
[ 000 ]
Bekijk gratis de handleiding van IKEA ÖRMINGE 205.910.92, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | ÖRMINGE 205.910.92 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11830 MB |
