Handleiding
Je bekijkt pagina 28 van 96
ENGLISH 28
Display
Designation
Description
0
Zero
The heating zone is activated.
1...9
Power
le
vel
Selection of the cooking level.
U
No pan detection
No pan or inadequate pan.
A
Heat accelerator
Automatic cooking.
E
Error message
Electronic failure.
H
Residual heat
The heating zone is hot.
P
Booster level
The
booster level
is act
ivated.
Keep warm
Maintain automatically of 107.6, 158 or 201.2°F
II
Pause
&
Play
The hob is in pause.
Ventilation
The cooling system is fully automatic. The
cooling fan starts with a low speed when the
calories brought out by the electronic system
reach a certain level. The ventilation starts his
high speed when the hob is intensively used.
The cooling fan reduces his speed and stops
automatically when the electronic circuit is
cooled enough.
Sensitive touch
Your ceramic hob is equipped with electronic
controls with sensitive touch keys. When your
finger presses the key, the corresponding
command is activated. This activation is
validated by a control light, a letter or a
number in the display and/or a “beep” sound.
In the case of a general use press only one key
at the same time.
Power selection zone “SLIDER” and
timer setting zone
To select the power with the slider, slide your
finger on the “SLIDER” zone. You can already
have a direct access if you put your finger
directly on the chosen level.
Starting-up
Start up / switch off the hob:
Action
Control panel
Display
To start
press
[ main On/Off ] key
[ ON ]
To stop
press
[ main On/Off ] key
nothing or [
H ]
Start up / switch off a heating zone:
Action
Control panel
Display
S
witch on
cooking zone
Press cooking zone
“On/Off” key
[ ON ]
To set (adjust
the power)
slide on the
“SLIDER“ to the
right or to the left
[ 1 ] to [ P ]
To stop
slide to [ 0 ] on
“SLIDER“
[ 0 ] or [ H ]
If no action is made within 20 second the
electronics returns in waiting position.
Residual heat indication
After the switch off of a heating zone or the
complete stop of the hob, the heating zones
are still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating
zones may be touched without danger.
As far as the residual heat indicators are on
light, don’t touch the heating zones and don’t
put any heat sensitive object on them. There
are risks of burn and fire.
Booster function
Booster [ P ] grant a boost of Power to the
selected heating zone.
If this function is activated the heating zones
work during 10 minutes with an ultra high
Power. This is foreseen for example to heat up
rapidly big quantities of water, like nuddles.
Start up / Stop the Booster:
Action
Control pane
l
Display
Switch on
cooking
zone
Press cooking zone
“On/Off” key
[ ON ]
SLIDE
DIRECT ACCESS
Power selection zone “SLIDER” and
timer setting zone
Bekijk gratis de handleiding van IKEA ÖRMINGE 005.910.93, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | ÖRMINGE 005.910.93 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11952 MB |
