Handleiding
Je bekijkt pagina 25 van 92
ENGLISH 25
Troubleshooting
Consult the
Authorised Service Agent or technician with license or the dealer where you have
purchased the product if you cannot remedy the trouble although you have implemented the
instructions in this section. Never attempt to repair a defective product yourself.
Problem
Possible Cause
Solution
Product emits metal
noises while heating
and cooling.
When the metal parts are heated,
they may expand and cause noise.
This is not a fault.
Product does not op-
erate
The mains fuse is defective or has
tripped
Check fuses
in the fuse box. If
necessary, replace or reset
them.
Product is not plugged into the
(grounded) socket
Check the plug connection.
If the display does not light up
when you switch the hob on again.
Disconnect the appliance at
the circuit breaker. Wait 20
seconds and then reconnect it.
"32" error on the timer Motherboard stops working
Unplug the applaince, wait 10
seconds and plug it in again.
Error messages
Table-4: Error codes and error causes
Error cause
Indicator
Display
"ON/OFF" key sender sensor error
"
FA
" symbol lights up
All cooking zone displays
"ON/OFF" key receiver sensor error
"
FC
" symbol lights up
All cooking zone displays
NTC short circuit
"
FE
" symbol
lights up
All cooking zone displays
NTC open circuit
"
Ft
" symbol lights up
All cooking zone displays
High temperature error
"
Fc
" symbol lights up
All cooking zone displays
Relay error
"
Fr
" symbol lights up
All cooking zone displays
Eeprom Checksum
error
"
FH
" symbol lights up
All cooking zone displays
ADC error
"
FJ
" symbol lights up
All cooking zone displays
Software error
"
F0
" symbol lights up
All cooking zone displays
Ambient light error
"
FL
" symbol lights up
All cooking zone displays
"ON/OFF"
key LED error
"
Fd
" symbol lights up
All cooking zone displays
For further information about error messages that may appear on the touch control panel,
see Table-4.
If the surface of the touch control panel is exposed to intense vapour, the entire
control
system may become deactivated and give error signal.
Keep the surface of the touch control panel clean. Erroneous operation may be observed.
Bekijk gratis de handleiding van IKEA FROMMESTA 605.876.20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IKEA |
| Model | FROMMESTA 605.876.20 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10571 MB |
