Ikan HF70 handleiding

Verlichting

Ikan

6 pagina's

PDF beschikbaar

Handleiding

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com

Installation & Power Supply

1. Ensure power is off before installation.

2. Place the light on the Ikan customized stands, release the tension knob on the 5/8” receiver, adjust the light in the desired direction, and then tighten

the tension knob on the 5/8” receiver.

3. When connecting the power cords, plug the AC power cords into the AC120 socket on the rear panel (as shown in the drawing).

DMX 512 Controls

The DMX IN/OUT on the HF70 allows for remote ﬁxture control over the brightness.

The 8Bit DMX allows for use with controllers that use just dimmer controls.

Depending on channel assigned the brightness is controlled on the ﬁrst fader.

What’s in the box?

Please carry and place the packing box carefully. Check the lighting equipment and accessories upon opening the box. Please contact us if anything is

damaged or missing. Please save the packing materials for replacing and repairing the products in the future.

Notice & Maintenance

1. The HF70 Spotlight working temperature range must be regulated. Overheating and Under-cooling will reduce the LED working life.

2. Products must be placed on a stable, dry, ﬂat surface. Avoid exposure to sunlight and operating in an environment with high humidity or explosive gas.

3. Don’t cover the fan vent. It will shorten the working life of the ﬁxture.

4. Don’t beat, knock or shake the lighting equipment during the operation.

5. If the HF70 isn’t working normally, please contact the Ikan repair department. Please don’t disassemble/re-assemble by yourself.

6. Please place the HF70 in a cool and dry place when you don’t use it for an extended period of time.

SET

mode

DC42V

512

SPOT

Bekijk gratis de handleiding van Ikan HF70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.