IK Multimedia AmpliTube X-VIBE Handleiding (95 Pagina's)

Handleiding

AmpliTube X-VIBE

Modulation Models

28

DOUBLER

Based on the doubler mode of the MXR® Flanger Doubler

Primarily used to thicken in the overall tone of the instrument. Very popular in ‘90s power metal.

Parameters

• SPEED: sets the rate of the effect.

From 0% to 100%.

• DEPTH: sets the intensity of the effect.

From 0% to 100%.

• BASS: boosts and cuts the low frequencies.

From -6 dB to + 6 dB.

• MID: boosts and cuts the mid frequencies.

From -6 dB to + 6 dB.

• TREBLE: boosts and cuts the high frequencies.

From -6 dB to + 6 dB.

• MID Q: sets the bandwidth of the mid parametric EQ, from narrow to wide.

From 0.2 to 3.

• MID FREQ: changes the center frequency of the mid parametric EQ.

From 80 Hz to 5000 Hz.

• MIX: regulates the amount of the dry and wet modulated signal. By default the mix is set to 100% WET.

From 0% to 100%.

• X-MODE: the X-MODE engages a higher depth and adds a crazy dizziness effect to the modulation.

ON or OFF.

DOUBLER Control Changes

Parameter Control Change # Values

SPEED 21 0 – 127

DEPTH 22 0 – 127

BASS 23 0 – 127

MID 24 0 – 127

TREBLE 25 0 - 127

MID Q 46 0 - 127

MID FREQ 47 0 - 127

MIX 48 0 -127

X-MODE 13 0 - 127

When a parameter range is not linear its values are equally divided among the 128 steps of a Control Change value.

Bekijk gratis de handleiding van IK Multimedia AmpliTube X-VIBE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.