IK Multimedia AmpliTube X-VIBE Handleiding (95 Pagina's)

Handleiding

AmpliTube X-VIBE

Modulation Models

19

PHAZER 10

Based on MXR® Phaser 100

A model of a classic analog phaser that offers 4 different modes characterized by their different intensity and

shape.

Parameters

• SPEED: sets the rate of the phaser effect. When the BPM SYNC is activated the SPEED parameter allows

you to select the available Time Signatures.

From 0% to 100% or from 1/32 to 1/1T when BPM SYNC is ON.

• DEPTH: sets the intensity of the effect.

From 0% to 100%.

• BASS: boosts and cuts the low frequencies.

From -6 dB to + 6 dB.

• MID: boosts and cuts the mid frequencies.

From -6 dB to + 6 dB.

• TREBLE: boosts and cuts the high frequencies.

From -6 dB to + 6 dB.

• MODE: selects one of the four different phaser modes.

From 1 to 4.

• MID Q: sets the bandwidth of the mid parametric EQ, from narrow to wide.

From 0.2 to 3.

• MID FREQ: changes the center frequency of the mid parametric EQ.

From 80 Hz to 5000 Hz.

• MIX: regulates the amount of the dry and wet modulated signal. By default the mix is set to 100% WET.

From 0% to 100%.

• X-MODE: the X-MODE sets the phaser to a deeper modulation with a higher rate for a temporary extreme

effect.

ON or OFF.

Bekijk gratis de handleiding van IK Multimedia AmpliTube X-VIBE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.