Ignition Wolfram 500 handleiding
Handleiding
Je bekijkt pagina 18 van 44
CAUTION!
Risk of injury due to unexpected movements of the device!
The device head may perform fast movements and generate very bright
light. This is the case immediately after the device is switched on, in
automatic or remote operation, and when a connected DMX controller
is switched o. Persons who are in the immediate vicinity of the device
may be injured or frightened by this.
Make sure that there are no obstacles within the movement range of
the mirror, and that no persons are in the immediate vicinity of the head
before switching it on and during its operation.
Switch o the device before any work is performed in the movement
range or immediate vicinity of the device, or if unauthorised persons are
in that area.
6. Conrm your selection with [ENTER].
ð
The device immediately performs the selected self test. The selected
channel is displayed.
7. To end the self test and exit the menu, press [MENU], or wait 30 seconds.
The device returns to its original DMX state after the self test. The test
values are saved automatically when the device is switched o.
1. Open the main menu.
2. Navigate to ‘Fixture Information’.
3. Use [UP] and [DOWN] to select the ‘Fixture Use Hour’ , ‘Temperature’ , ‘Fan
State’ , ‘Firmware Version’ or ‘RDM UID’ submenu.
4. Conrm your selection with [ENTER].
ð
Depending on your selection, the operating hours, the device tempera‐
ture, the fan status, the rmware version or the RDM UID is displayed.
5. To exit the menu, press [MENU], or wait 30 seconds.
1. Open the main menu.
2.
Navigate to ‘Fixture Information è LED Use Hour’.
3. Use [UP] and [DOWN] to select the ‘Total LED Hour’ (total time) or ‘LED On
Hour’ (current switch-on time) submenu.
4. Conrm your selection with [ENTER].
ð
The desired selection is saved.
5. Use [UP] and [DOWN] to select the ‘LED Hours Reset’ submenu.
6. Conrm your selection with [ENTER].
ð
A three-digit PIN is displayed.
7. Use [UP] and [DOWN] to enter the digits ‘050’ .
Displaying device information
Displaying and resetting LED informa‐
tion
Operating
18
Wolfram 500
Moving Head
Bekijk gratis de handleiding van Ignition Wolfram 500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | Wolfram 500 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4719 MB |
