Ignition Gawan 200 handleiding
Handleiding
Je bekijkt pagina 17 van 40
3. Use [UP] and [DOWN] to select the channel for which the self test is to be per‐
formed.
CAUTION!
Risk of injury due to unexpected movements of the device!
The device head may perform fast movements and generate very bright
light. This is the case immediately after the device is switched on, in
automatic or remote operation, and when a connected DMX controller
is switched o. Persons who are in the immediate vicinity of the device
may be injured or frightened by this.
Make sure that there are no obstacles within the movement range of
the mirror, and that no persons are in the immediate vicinity of the head
before switching it on and during its operation.
Switch o the device before any work is performed in the movement
range or immediate vicinity of the device, or if unauthorised persons are
in that area.
4. Conrm your selection with [ENTER].
ð
The device immediately performs a self test. The selected channel is dis‐
played. The following functions are tested: Pan, Tilt, Color, Gobos, Prism,
Prism Rotation, Frost, Focus, Shutter, Dimmer and Reset.
5. To end the self test and exit the menu, press [MENU], or wait 30 seconds.
The device returns to its original DMX state after the self test. The test
values are saved automatically when the device is switched o.
1. Open the main menu.
2. Navigate to ‘Information’.
3. Use [UP] and [DOWN] to select the ‘Fixture Use Hour’ , ‘Temperature’ , ‘Fan
State’ , ‘Firmware Version’ or ‘RDM UID’ submenu.
4. Conrm your selection with [ENTER].
ð
Depending on your selection, the operating hours, the device tempera‐
ture, the fan status, the rmware version or the RDM UID is displayed.
5. To exit the menu, press [MENU], or wait 30 seconds.
1. Open the main menu.
2.
Navigate to ‘Information è LED Use Hour’.
3. Use [UP] and [DOWN] to select the ‘Total LED Hour’ (total time) or ‘LED On
Hour’ (current switch-on time) submenu.
4. Conrm your selection with [ENTER].
ð
The desired selection is saved.
5. Use [UP] and [DOWN] to select the ‘LED Hours Reset’ submenu.
6. Conrm your selection with [ENTER].
Displaying device information
Displaying and resetting LED informa‐
tion
Operation
Gawan 200
17
Moving Head
Bekijk gratis de handleiding van Ignition Gawan 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | Gawan 200 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3997 MB |
