Ignition Co9 V2 LED Flood IP65 540W RGBW handleiding

Verlichting

Ignition

40 pagina's

PDF beschikbaar

Handleiding

5 Starting up

Create all connections while the device is o. Use the shortest possible high-quality

cables for all connections. Take care when running the cables to prevent tripping

hazards.

Connect the DMX input of the device to the DMX output of a DMX controller or

another DMX device. Connect the output of the rst DMX device to the input of the

second one, and so on to form a daisy chain. Always ensure that the output of the

last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).

When you congure a group of devices in ‘Master / Slave’ mode, the rst unit will

control the others. This feature is especially useful to start a show without much pro‐

gramming. Connect the DMX output of the master unit to the DMX input of the rst

slave unit. Then connect the DMX output of the rst slave unit to the DMX input of

the second slave unit and so on.

Please note that this device must not be connected to a dimmer.

Connections in DMX mode

Connections in ‘Master / Slave‘ mode

Starting up

Co9 V2 LED Flood IP65 540W RGBW

LED oodlight

Bekijk gratis de handleiding van Ignition Co9 V2 LED Flood IP65 540W RGBW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.