Ignition 2bright Pint TW200 IP handleiding
Handleiding
Je bekijkt pagina 73 van 80
Symptom Remedy
The unit does not work, no
light.
Check the mains connection and the fuse.
No response to the DMX con‐
troller.
1. Check the DMX ports and cables for proper connection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside to
high voltage cables that may cause damage or interfer‐
ence to DMX interface circuits.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
2bright Pint TW200 IP
73
LED PAR
Bekijk gratis de handleiding van Ignition 2bright Pint TW200 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | 2bright Pint TW200 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4329 MB |
