Ignition 2bright Pint TW200 IP MK II handleiding

Verlichting

Ignition

76 pagina's

PDF beschikbaar

Handleiding

Symptom Remedy

The device is not working, no

light, the fan is not running

Check the mains connection and main fuse.

No response to the DMX con‐

troller

1. Check the DMX connections and cables for proper

connection

2. Check the address settings and the DMX polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables run near or parallel to

high-voltage cables that may cause damage or interfer‐

ence to a DMX interface circuit.

Unintended light eects Make sure that the DMX channel assignments of the

devices do not overlap, and that the DMX start address

of devices with independent control is always higher by

the number of channels that have been set for the DMX

mode on another device.

If the procedures recommended above do not succeed, please contact our Service Center. You

can nd the contact information at www.thomann.de.

Troubleshooting

2bright pint TW200 IP MK II

LED PAR

Bekijk gratis de handleiding van Ignition 2bright Pint TW200 IP MK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.