Ignition 2bright Pint TW200 IP MK II Handleiding (76 Pagina's)

Handleiding

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘Settings’ .

Conrm with [ENTER].

2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX Fail’ . Conrm with

[ENTER].

3. Use [UP] or [DOWN] to select ‘Hold’ , ‘Blackout’ or ‘ManualMode’ to make the setting to

be applied if the DMX controller fails.

The following submenus are available:

Menu level 3 Function

‘Hold’ The last received signal is held.

‘Blackout’ The spotlight is turned o.

‘ManualMode’ The device calls up the values set in the ‘Stand Alone’ menu.

4. Press [ENTER] to accept the selection.

Setting the behaviour following

DMX control failure

Operating

2bright pint TW200 IP MK II

27

LED PAR

Bekijk gratis de handleiding van Ignition 2bright Pint TW200 IP MK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.