Ignition 2bright Pint TW200 IP MK II Handleiding (76 Pagina's)

Handleiding

1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows ‘DMX Address’ .

Conrm with [ENTER].

2. Use [UP] or [DOWN] to select the desired DMX address between ‘001’ and ‘512’ .

3. Press [ENTER] to accept the selection.

This setting is only relevant when the device is controlled via DMX. Make sure that this

number matches the conguration of your DMX controller. The following table shows

the highest possible DMX address for the various DMX modes.

Mode Display Highest possible DMX address

1-channel ‘1CH’ 512

2-channel, variant A ‘2CH A’ 511

2-channel, variant B ‘2CH B’ 511

3-channel ‘3CH’ 510

4-channel ‘4CH’ 509

5-channel ‘5CH’ 508

8-channel ‘8CH’ 505

Setting the DMX address

Operating

22

2bright pint TW200 IP MK II

LED PAR

Bekijk gratis de handleiding van Ignition 2bright Pint TW200 IP MK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.