Ignition 2bright Pint TW200 IP MK II handleiding

Verlichting

Ignition

76 pagina's

PDF beschikbaar

Handleiding

DANGER!

Risk of death from electrical current!

A short circuit can cause res and loss of life. Always use properly insulated, tripe-core mains cable. Do not modify the mains cable. If

the insulation is damaged, immediately switch o the power supply and have it repaired. If in doubt, contact a qualied electrician.

DANGER!

Danger to life due to electric current!

Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts

inside. Do not use the device when covers, safety equipment or optical components are missing or damaged.

WARNING!

Risk of eye damage caused by high light intensity!

The device generates highly intense light radiation. Looking directly into the light source can damage the eyes. Never look directly

into the light source.

WARNING!

Risk of epileptic t due to ashing lights!

The device emits ashing lights (strobe eects). Flashing lights can trigger epileptic ts in specic people. If you are at risk of epi‐

lepsy, avoid spending longer periods of time subjected to ashing lights and looking into strobing light.

WARNING!

Danger of burns on the device surface!

The surface of the device becomes very hot during operation. Skin contact can result in burns. Never touch the device with your bare

hands during operation. After switching o the device, wait for at least 15 minutes before touching it.

Safety instructions

2bright pint TW200 IP MK II

LED PAR

Bekijk gratis de handleiding van Ignition 2bright Pint TW200 IP MK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.