Ignition 2Bright Expo 575 CW handleiding
Handleiding
Je bekijkt pagina 10 van 36
NOTICE!
Risk of re due to covered vents and neighbouring heat sources!
If the vents of the device are covered or the device is operated in the immediate vicinity of other heat sources, the device can over‐
heat and burst into ames. Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat
sources. Never operate the device in the immediate vicinity of naked ames.
NOTICE!
Risk of overheating and risk of re when operated with closed barn doors!
If the spotlight is operated with the barn doors closed, there is a risk of overheating and re. In addition, even short-term operation
with the barn doors closed can reduce the service life of the LEDs. Operate the device only with open barn doors.
NOTICE!
Risk of overheating and re due to inadequate distance and bad ventilation!
If the distance between the light source and the illuminated surface is too short or the device is badly ventilated, the device can
overheat and cause res. Make sure that illuminated surfaces are more than 2 m away. Do not operate the device in ambient temper‐
atures above 40 °C. Always ensure sucient ventilation at the operating location.
NOTICE!
Fire hazard due to burning glass eect of the optical lenses!
The optical lenses of the device focus the light and can act like burning glass when exposed to sunlight. Keep unmounted optical
lenses away from direct sunlight. Never leave lenses lying around in the open.
Safety instructions
10
2Bright Expo 575 WW, 2Bright Expo 575 CW
LED Spotlight
Bekijk gratis de handleiding van Ignition 2Bright Expo 575 CW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ignition |
| Model | 2Bright Expo 575 CW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2335 MB |
