Ignition 2bright Blind FC LED IP handleiding

Verlichting

Ignition

52 pagina's

PDF beschikbaar

Handleiding

1. Press [MENU] repeatedly until the display shows ‘CHMD’ . Conrm with [ENTER].

2. Use [UP] or [DOWN] to select the desired DMX mode (1, 3, 4, 6, 8, 10 or 12 channels).

Depending on the selected mode, the display shows ‘1CH’ , ‘3CH’ , ‘4CH1’ , ‘4CH2’ , ‘6CH’ ,

‘8CH’ , ‘10CH’ or ‘12CH’ .

3. Press [ENTER] to accept the selection.

This setting is only relevant when the device is controlled via DMX.

In this operating mode you select one of the automatic programmes and congure the speed

and the dimmer intensity of the automatic programme.

1. Press [MENU] repeatedly until the display shows ‘AUTO’ . Conrm with [ENTER].

2. Use [UP] or [DOWN] to select the desired automatic programme (display shows ‘PR01’ …

‘PR17’ ). Conrm with [ENTER].

3. Press [UP] or [DOWN] to select the desired submenu or the desired value.

The following sub menus are available:

Menu level 3 Menu level 4 Description

‘Dim’ ‘000…255’ Dimmer intensity

‘Speed’ ‘000…255’ Running speed from slow to fast

4. Press [ENTER] to accept the selection.

Setting the DMX mode

Selecting and conguring auto‐

matic programmes

Operating

2bright Blind FC LED IP

Blinder

Bekijk gratis de handleiding van Ignition 2bright Blind FC LED IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.