IFM VSE163 handleiding
Handleiding
Je bekijkt pagina 3 van 24
Diagnostic electronics with Modbus TCP interface VSE163
© ifm electronic gmbh 11704143 / 00 09 / 2025 3
1 Safety instructions
• The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in ac-
cordance with legal and normative requirements to be provided to the operator and user of the sys-
tem. This documentation must contain all necessary information and safety instructions for the op-
erator, the user and, if applicable, for any service personnel authorised by the architect of the sys-
tem.
• Read this document before setting up the product and keep it during the entire service life.
• The product must be suitable for the corresponding applications and environmental conditions without
any restrictions.
• Only use the product for its intended purpose (
→ Intended use).
• If the operating instructions or the technical data are not adhered to, personal injury and/or damage to
property may occur.
• The manufacturer assumes no liability or warranty for any consequences caused by tampering with the
product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the product must be carried
out by qualified personnel authorised by the machine operator.
• Protect units and cables against damage.
• The design of the unit corresponds to protection class III (EN61010) except for the terminal blocks.
Protection against accidental contact (safety from finger contact to IP 20) for qualified personnel is only
ensured if the terminals have been completely inserted. Therefore the unit must always be mounted in
a control cabinet of at least IP 54 which can only be opened using a tool.
• For DC units the external 24 V DC supply must be generated and supplied according to the require-
ments for safe extra-low voltage (SELV) since this voltage is provided near the operating elements and
at the terminals for the supply of sensors without further protection measures.
Bekijk gratis de handleiding van IFM VSE163, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | VSE163 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1654 MB |
