IFM TAD981 handleiding
Handleiding
Je bekijkt pagina 14 van 22
14
6 Installation
► Before installing and removing the unit make sure that no pressure is
applied to the system and there is no medium in the pipe�
► Note dangers related to extreme machine / medium temperatures�
6.1 Units with G1 / Aseptoflex Vario process connection
The unit can be fixed to different process connections�
► Insert the unit with process adapter into the process connection and tighten
using a spanner�
Information about available adapters at www�ifm�com�
► Observe the instructions of the adapter�
► Use a lubricating paste which is suitable and approved for the
application�
► Recommended tightening torque 35 Nm�
6.1.1 Installation using an adapter with sealing ring (hygiene-compliant)
Order no� E332xx / E333xx�
► To meet the hygiene regulations use a process adapter with leakage port�
The adapters are supplied with EPDM O-ring (order no� E30054)�
More sealing rings are available as accessories:
• FKM O-ring (order no� E30123)
• PEEK sealing ring (order no� E30124)� The PEEK sealing ring is long-term
stable and maintenance-free� When you replace the PEEK sealing ring or
change from a PEEK sealing ring to an O-ring the process adapter also needs
to be replaced with a new equivalent adapter�
6.1.2 Installation using a welding adapter with sealing ring (hygiene-
compliant)
► To meet the hygiene regulations use a process adapter with leakage port�
► Make sure that the process adapter does not warp during welding�
The adapter is supplied with EPDM O-ring (order no� E30054)�
Another sealing ring is available as accessory:
• FKM O-ring (order no� E30123)�
Bekijk gratis de handleiding van IFM TAD981, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | TAD981 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1559 MB |
