IFM SUH720 handleiding
Handleiding
Je bekijkt pagina 31 van 39
Ultrasonic flow meter SUH1xx SUH22x SUH3xx SUH42x SUH5xx SUH6xx SUH7xx SUH8xx
31
– All writeable unit identification parameters such as [Application Specific Tag], [Function Tag] or
[Location Tag].
– Diagnostic parameters, status parameters, events.
After the Back to Box reset, the sensor suspends communication and measurement operation
until the voltage is interrupted. The IO-Link data storage is not triggered.
We recommend documenting your own settings in the chapter Factory setting before carrying
out a reset.
9.4 Diagnostic functions
The device offers a range of diagnostic functions.
Diagnostic messages can be provided via an output signal:
Ò Switching signal Diagnosis (Ò/19).
In addition, the diagnostic information described below is available via the IO-Link interface.
9.4.1 Read totaliser values
For the totalisers, the following values can be read at any time via the IO-Link interface:
Totaliser values Vol.1 and Vol.2
• Current flow quantity (=consumed quantity since the last totaliser reset)
• Value before the last totaliser reset
• Time since the last totaliser reset
Lifetime totaliser (for the entire operating time)
• Flow quantity in preferred direction (= positive direction of flow)
• Flow quantity in non-preferred direction (= negative direction of flow)
Ò Flow direction (Ò/27)
9.4.2 Memory
The unit stores the maximum and minimum measured process values.
The current value can be read via the IO-Link interface.
Selectable values:
• [Lo.F]: Minimum value memory for volumetric flow
• [Hi.F]: Maximum value memory for volumetric flow
• [Lo.T]: Minimum value memory for temperature
• [Hi.T]: Maximum value memory for temperature
It makes sense to delete the memories as soon as the unit operates under normal operating
conditions for the first time.
9.4.3 Operating hours counter
The operating hours since the first set-up are stored by the unit.
The current value can be read via the IO-Link interface.
Bekijk gratis de handleiding van IFM SUH720, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | SUH720 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3147 MB |
