IFM SUH520 handleiding
Handleiding
Je bekijkt pagina 18 van 39
SUH1xx SUH22x SUH3xx SUH42x SUH5xx SUH6xx SUH7xx SUH8xx Ultrasonic flow meter
18
Parameter Explanation
FOUx Behaviour of output OUTx in case of an error
FProx Counting method of the totaliser: consideration of the direction of flow
FrP1 Frequency signal which is provided when the upper measured value (MEW or FEP1) is reached.
FSP1 Frequency start point for OUT1 = Lower measured value from which a frequency signal is provid-
ed (only for temperature measurement).
Hi.F Highest flow value measured
Hi.T Maximum temperature value measured
ImPRx Totaliser function: pulse signal (ImPR = YES) or switching signal (ImPR = NO)
ImPSx Pulse value (= flow value at which 1 pulse is provided)
LFC Low flow cut-off (= flow value below which flow is evaluated as standstill)
Lo.F Lowest flow value measured
Lo.T Minimum measured temperature value
MEdi Selection of the medium to be monitored
oux Output configuration for output OUTx (e.g. switching output with hysteresis function)
P-n Output polarity for the switching outputs
rPx Reset point for switching output OUTx with hysteresis function
rTox Setting for the totaliser reset (manually or time-controlled)
SELx Process value for output OUTx
S.FLW Simulated flow value in simulation mode
S.On Starts the simulation mode
SPx Switch point for switching output OUTx with hysteresis function
S.Tim Duration of the simulation in minutes
S.TMP Simulated temperature value in simulation mode
uni.F Standard unit of measurement for flow
uni.T Standard unit of measurement for temperature
Vol.x Current counter reading for totaliser Vol.x
Vol.L Current counter reading for totaliser Vol.L over the whole lifetime
9.2 Output configuration
This chapter describes the options for the output signals at OUT1 and OUT2.
9.2.1 Switching signal for limit value monitoring
A switching signal can be output for process value monitoring. OUTx changes its switching state when
the set switching limits are exceeded or not reached. You can choose between hysteresis and window
function.
Bekijk gratis de handleiding van IFM SUH520, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | SUH520 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3147 MB |
