IFM R2D201 handleiding
Handleiding
Je bekijkt pagina 7 van 28
Radar area sensor with CAN R2D101 R2D103 R2D201
7
3 Intended use
3.1 Application area
Based on FMCW radar, the device monitors an area without contact and detects the distance, position
and velocity of stationary and moving objects. Target areas, switching limits and zones (ROI) can be
defined.
The sensor was designed for industrial use (permanently installed device). However, it can also be
used and operated in mobile mode (sensor moves) if the corresponding requirements are met.
The dimension of the detection range of the device depends on the target object to be detected. The
detection ranges for defined targets (corner reflectors) are defined in the technical data sheet of the
device.
The setting of the device as well as the visualisation of the detection range can be done via the Vision
Assistant or moneo.
The application area of the device depends on the base frequency used and the country in
which it is operated. Applicable national approval restrictions must be checked prior to set-up of
the device. Country-specific features must be taken into account when operating the device.
Operation of the device is only permitted in the countries listed in the document “Radio
approval”. When operating the device in countries that are not on the list, interference with
protected frequency ranges may occur.
For USA, Canada:
Devices operating at a base frequency of 60 GHz are intended for static, immobile applications only. The device may move
within a fixed installation. This includes stationary applications for collision avoidance, level measurement, object detection,
flow measurement and area monitoring. The devices are not approved for vehicular use. The following devices belong to this
group:
• R2D103
Devices operating at a base frequency of 77 GHz are intended for vehicular use. Besides, the devices can be used for fixed
and mobile applications in airports in the USA and Canada. The following devices belong to this group:
• R2D201
For Europe:
Devices operating at a base frequency of 60 GHz can be used for fixed, mobile or portable applications, regardless of the spe-
cific application. The following devices belong to this group:
• R2D101
Devices operating at a base frequency of 77 GHz are intended for fixed and mobile transport and traffic telematics (TTT) appli-
cations only. This includes, for example, obstacle detection, monitoring of tunnels and level crossings and parking assistance.
The following devices belong to this group:
• R2D201
• The device may only be operated in countries for which it has been approved.
• If the device is passed on, the recipient must be informed of applicable national approval
restrictions.
The device safety is rated for use under the following operating conditions according to EN IEC
61010-1:2020+A11:2020:
• Protection class 3 (SELV / PELV) and supply of the device to limited energy according to chapter
9.4 IEC61010-1. The external circuits have to be isolated as required by figure 102 in
IEC61010-2-201.
• Indoor and outdoor use (outdoor use not for cURus)
• Altitudes up to 2000 m
• Relative air humidity up to max. 90%, non condensing
Bekijk gratis de handleiding van IFM R2D201, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | R2D201 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1849 MB |
