IFM PN7043 handleiding
Handleiding
Je bekijkt pagina 7 van 33
7
UK
Operating mode 3
Description High IO-Link process value and parameter resolution
(device-specific: see IODD suitable for the operating mode)�
The menu items [ou1] and [ou2] are extended by the setting
option [OFF] (→ 9.4.1)�
IO-Link standard command "Flash on" is available (→ 4.4.2)�
The following IO-Link markings are available: Application Specific
Tag, Function Tag and Location Tag (→ 4.4.2)�
This operating mode is available as of device status
BA�For the device status see the labelling on the device�
BA xxxx
PNxxxx
Application Improved controllability via IO-Link�
Highly granular setting of switch-on and switch-off points�
IODD designation E�g� PN7094 Status_B High Resolution / (CMPT = 3):
E�g� PN7012 Status_B
At www�ifm�com in the download area of the corresponding
article�
Manual selection of the operating mode see (→ 9.2), selection of the
operating mode via IO-Link interface see → additional document on the
selection of the operating mode at www�ifm�com
4.2 Communication, parameter setting, evaluation
OUT1 (pin 4)
• Switching signal for system pressure limit
• Communication via IO-Link
OUT2 (pin 2) • Switching signal for system pressure limit
Bekijk gratis de handleiding van IFM PN7043, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PN7043 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2682 MB |
