IFM PN2696 handleiding
Handleiding
Je bekijkt pagina 22 van 33
22
9.5.7 Set colour change of the display
► Select [coLr] and set the function:
- [rEd] = display colour red (independent of the measured value)�
- [GrEn] = display colour green (independent of the measured value)�
- [r1ou] = display colour red when OUT1 switches�
- [G1ou] = display colour green when OUT1 switches�
- [r2ou] = Display colour red when OUT2 switches ([ou2] = [Hxx] /
[Fxx])�
- [G2ou] = Display colour green when OUT2 switches ([ou2] = [Hxx] /
[Fxx])�
- [r-12] = Display colour red when the measured value is between the
limit values of OUT1 and OUT2 ([ou2] = [Hxx] / [Fxx])�
- [G-12] = Display colour green when the measured value is between
the limits of OUT1 and OUT2 ([ou2] = [Hxx] / [Fxx])�
- [r-cF] = Display colour red when the measured value is between the
freely definable limits [cFH]*
)
and [cFL]*
)
�
- [G-cF] = Display colour green when the measured value is between
the freely definable limits [cFH]*
)
and [cFL]*
)
�
*
)
The parameters [cFH] and [cFL] can only be selected in the menu tree if
[r-cF] or [G-cF] has been activated�
► Select [cFH] and set the upper limit
(only possible if [r-cF] or [G-cF] has been activated)�
> The setting range corresponds to the measuring range and its minimum
limit is [cFL]�
► Select [cFL] and set the lower limit
(only possible if [r-cF] or [G-cF] has been activated)�
> The setting range corresponds to the measuring range and its maximum
limit is [cFH]�
Bekijk gratis de handleiding van IFM PN2696, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PN2696 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2288 MB |
