IFM PN2696 handleiding
Handleiding
Je bekijkt pagina 15 van 33
15
UK
diS Update rate and orientation of the display�
CMPT Selection of the operating mode
9 Parameter setting
During parameter setting the unit remains in the operating mode� It continues
to monitor with the existing parameters until the parameter setting has been
completed�
9.1 Parameter setting in general
3 steps must be taken for each parameter setting:
1
Select parameter
► Press [●] to get to the menu.
► Press [▲] or [▼] until the required
parameter is displayed�
2
Set parameter value
► Press [●] to edit the selected
parameter�
► Press [▲] or [▼] for at least 1 s.
> After 1 s: setting value is changed:
incrementally by pressing the button
once or continuously by keeping the
button pressed�
Numerical values are incremented continuously with [▲] or decremented with [▼]�
3
Acknowledge parameter value
► Briefly press [●].
> The parameter is displayed again�
The new setting value is saved�
Set other parameters
► Press [▲] or [▼] until the required parameter is displayed.
Finish parameter setting
► Press [▲] or [▼]
several times until the current measured value is displayed or wait for
30 s�
> The unit returns to the process value display�
Bekijk gratis de handleiding van IFM PN2696, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PN2696 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2288 MB |
