IFM PG1707 handleiding
Handleiding
Je bekijkt pagina 31 van 55
Electronic manometer PG17xx
31
• [Two Point Mode]
• [Window Mode]
The switching signal channel changes to the active state depending on the process data value (PDV).
The active state is above the switch point in [Single Point Mode] and [Two Point Mode] and within the
window section in [Window Mode].
Switch point logic
By setting the switch point logic [High active] or [Low active], you can specify which value the
switching signal channel has in the active state:
• [High active]: The switching signal channel is “high” in the active state (= ON = normally open = 1)
• [Low active]: The switching signal channel is “low” in the active state (= OFF = normally closed = 0)
The following figures show the status of the switching signal channels depending on the switch point
mode, switch point logic and process data value (PDV).
Deactivated
If the [Deactivated] switch point mode is set for a switching signal channel, then the switching signal
channel will permanently have the following value regardless of the process value:
• For switch point logic [High active]: permanently “low”.
• For switch point logic [Low active]: permanently “high”.
low
PDV
0
Fig.11: [Deactivated] / [High active]
high
PDV
1
Fig.12: [Deactivated] / [Low active]
Single Point Mode
Only one switch point (SP1) is manually set or taught.
The reset point (SP1-H) results from the switch point and the set hysteresis.
When teaching, the switch point is set below the taught process value (TP1) by the hysteresis.
SP1
low
high
TP1
PDV
0
1
H
H
SP1
-
H TP1
-
H
Fig.13: [Single Point Mode] / [High active]
H: Hysteresis
SP1: Switch point
TP1: Teach point
TP1-H: Switch point during teach (= SP1)
SP1-H Reset point
SP1
low
high
TP1
PDV
1
0
H
H
SP1
-
H TP1
-
H
Fig.14: [Single Point Mode] / [Low active]
H: Hysteresis
SP1: Switch point
TP1: Teach point
TP1-H: Switch point during teach (= SP1)
SP1-H Reset point
Two Point Mode
One switch point SP1 and one switch point SP2 are manually set or taught.
Bekijk gratis de handleiding van IFM PG1707, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PG1707 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4616 MB |
