IFM PE3026 handleiding
Handleiding
Je bekijkt pagina 20 van 32
6. Programming
Take the following 3 steps for programming:
If no button is pressed for 20s during the setting procedure, the unit
returns to the operating mode.
Locking / Unlocking
The unit can be electronically locked to prevent unwanted adjustment
of the set parameters: Press (in Run mode) both pushbuttons for 10s.
As soon as the indication goes out the unit is locked or unlocked.
Units are delivered from the factory in the unlocked state.
With the unit in the locked state is indicated briefly when you try
to change parameter values.
20
1
Mode/Enter
Set
Mode/Enter
Set
Mode/Enter
Set
Press the Mode/Enter button
several times until the respective
parameter is displayed.
Press the Set button and keep
it pressed. The current parameter
value is indicated for 5s,
then the value is increased*
(incremental by pressing briefly or
scrolling by holding pressed).
Press the Mode/Enter button
briefly (= acknowledgement).
The parameter is displayed again,
the set parameter value
becomes effective.
2
3
*Decrease the value: Let the display of the parameter value move to the
maximum setting value. Then the cycle starts again at the minimum setting
value.
Wait 5s (the unit passes to the operating mode and
the current measured value is indicated again),
or start again with step 1 to program other parameters.
Bekijk gratis de handleiding van IFM PE3026, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | PE3026 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2798 MB |
