IFM LT3923 handleiding
Handleiding
Je bekijkt pagina 22 van 36
LT39xx Electronic sensor for level and temperature
22
SP1
u Press [Mode/Enter] until the requested parameter is displayed.
2: Set parameter value
150
170
u Press [SET] and keep it pressed.
w Current setting value of the parameter flashes for 5 s.
w After 5s: The Setting value is changed.
Incrementally by pressing the button once or continuously by keeping the button pressed.
w The numerical values are incremented continuously:
For reducing the value:
u Let the display move to the maximum setting value. Then the cycle starts again at the minimum
setting value.
3: Acknowledge parameter value
SP1
u Briefly press [Mode/Enter].
w The parameter is displayed again. The new setting value is saved.
Setting of other parameters:
u Start again with step 1.
Finishing the parameter setting:
u Press [Mode/Enter] several times until the current measured value is displayed, or wait for 30 s.
w The sensor returns to the process value display.
If [C.Loc] is displayed when you try to change a parameter value, a parameter setting process is
active via the IO-Link communication (temporary locking).
If [S.Loc] is displayed, the sensor is permanently locked via software. This locking can only be
removed with a parameter setting software.
Change from menu level 1 to menu level 2:
Bekijk gratis de handleiding van IFM LT3923, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | LT3923 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2799 MB |
