IFM DTI921 handleiding
Handleiding
Je bekijkt pagina 46 van 46
DTI801 DTI901 DTI911 DTI921
46
Glossary
EPC
Electronic Product Code, memory area for
identification numbers on the ID tag.
ID tag
An ID tag is used to identify objects. A read/
write device is used to read the ID tag via a
high-frequency radio signal. An ID tag
consists of an antenna, an analogue circuit
for receiving and transmitting (transceiver),
a digital circuit and a non-volatile memory.
IODD
Digital description of the device. The IODD
is required for device parameter setting via
IO-Link.
IO-Link
IO-Link is a standardised IO technology
(IEC 61131-9) for communicating with
sensors and actuators. Point-to-point
communication is based on 3-wire sensor
and actuator connection. IO-Link is not a
fieldbus, but the further development of the
previous connection technology.
RSSI
The Received Signal Strength Indication is
the field strength of the received signal.
TID
The transponder ID is a globally unique
identification number of the ID tag. It is
assigned by the chip manufacturer of the ID
tag during production and cannot be
changed afterwards. The TID is stored in
the TID storage area of the ID tag.
USER memory area
The USER memory area is a memory area
on the ID tag for application-specific data.
Bekijk gratis de handleiding van IFM DTI921, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | DTI921 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3980 MB |
