IFM CR2051 handleiding
Handleiding
Je bekijkt pagina 6 van 132
ioControl
6
NOTE!
Excessive current, weld slag and soiling due to welding
> Damage to the device, deterioration of the electrical safety
► Welding work on the chassis frame must only be carried out by
qualified personnel�
► Remove and cover the plus and minus terminals of the batteries�
► Disconnect all contacts of the device from the on-board system prior
to welding on the vehicle or machine�
► Connect the earth terminal of the welding device directly to the part
to be welded�
► Do not touch the device or electric cables with the welding electrode
or the earth terminal of the welding device�
► Protect the device incl� all connectors and all connection cables
against weld slag and soiling�
3 Functions and features
The freely programmable controllers of the "ioControl" series are rated for use
under difficult conditions: This includes an extended temperature range, strong
vibration, intensive EMC interferences and wet environments�
By means of the application software the user can configure the inputs and
outputs to adapt to the respective application� The controllers can be used as
CANopen device, master or intelligent I/O module (→ 9 Technical data)�
Application-specific extensions and adaptations are possible in conjunction with
additional products of the modular ioControl and Basic series�
WARNING!
Deterioration of the safety function
> Possible hazard for people or installations
The device is not approved for safety-related tasks in the field of
operator protection�
► Only use the device within the limits of the technical data
(→ 9 Technical data)�
Bekijk gratis de handleiding van IFM CR2051, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | CR2051 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13445 MB |
