IFM CR2040 handleiding
Handleiding
Je bekijkt pagina 8 van 132
ioControl
8
5.3 Fixing
► Insert the enclosed tubular rivets from the back of the device in the 3 fixing
holes�
► Fix the device using 3 washers and M5 screws�
Tighten the screws alternately�
Use of the tubular rivets
Tightening torque: 2�0 Nm
Hole dimensions (→ 9 Technical data)
Screws to be used (examples): Standard
Cylinder screws with hexagon socket (M5 x L) DIN EN ISO 4762
Cylinder screws with hexagon socket and low head (M5 x L) DIN 7984
5.4 Cable seal
Before and during installation, observe the pollution degree
(→ 9 Technical data) until the protection rating is ensured by means of
connectors/dummy plugs� Protection rating IP 65 / IP 67 is only guaranteed
if all ports are sealed by means of connectors or dummy plugs�
The gap dimensions of the unit may vary�
Bekijk gratis de handleiding van IFM CR2040, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | CR2040 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13158 MB |
