IFM AL4302 handleiding
Handleiding
Je bekijkt pagina 57 van 83
Remote I/O module 8DO 8DI AL4302
57
• pin 2 function of the port / selection of the count direction (only operating mode CTDIR)
• threshold CT of the main counter
• threshold CTb of the batch counter
Available parameters per switching channel:
• Main SSC - switching mode
• Main SSC - switching logic
• Main SSC - reaction to increasing / decreasing counter edges
• Main SCC - switch point SP1
• Main SCC - switch point SP2
• Main SCC - switch delay
• Main SCC - reset delay
• Main SCC - hysteresis
• Batch SCC - switching mode
• Batch SCC - switching logic
• Batch SCC - reaction to increasing / decreasing counter edges
• Batch SCC - switch point SP1
• Batch SCC - switch point SP2
• Batch SCC - reset delay
• Batch SCC - reset delay
• Batch SCC - hysteresis
Requirements:
ü Device is integrated in PROFINET project.
u Open the [Device view] of the device.
w The [Device overview] tab displays the device structure.
u In the hardware catalogue under [Module] > [Counter], select the module [Counter Module + SSC]
and move it to slot 2 using drag& drop.
w The counter switching channel module is assigned to the device.
w The device overview shows the available port slots.
w The hardware catalogue displays the available submodules.
u In the hardware catalogue under [Submodule] > [Counter], select the desired counter switching
channel submodule and move it to a free slot of the port using drag& drop.
w The submodule is assigned to the port slot.
u Click on the slot of the assigned submodule.
w The [Properties] view appears.
w The [General] tab displays the properties of the module.
w [Module parameters] provides access to the available parameters.
u Set the parameters of the counter module in the [Counter parameters] area.
u Set the parameters of the switching channel assigned to the main counter in the [Main SSC
Parameters] area.
u Set the parameters of the switching channel assigned to the batch counter in the [Batch SSC
Parameters] area.
u Optional: Repeat the process to assign further counter switching channel submodules to free ports
and to configure them.
Bekijk gratis de handleiding van IFM AL4302, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4302 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7072 MB |
