IFM AL4203 handleiding
Handleiding
Je bekijkt pagina 30 van 82
AL4203 Remote I/O module 8DO 8DI
30
ü The detailed view of the device is active.
u Select menu [io] > [port[n]] > [ssc] (n: 5...8).
w The menu page shows the current settings of the switching channels of the main counter (main)
and the batch counter (batch) of the port.
u Set the parameters.
u Write the changed values to the device.
w The switching signal channels are configured.
9.1.4.4 Configuring outputs
Available parameters:
Parameter Description Value range Access
[current_limit] Max. output current of the digital out-
put (value in mA)
• 0: 0 A
…
• 1000: 1000mA (default)
…
• 3600: 3600mA
rw
1
[output_select] Selection of control instance of digital
output
• PLC: higher-level PLC
• Counter 1 SSC Main: Counter 1
switching channel - main counter
• Counter 1 SSC Batch: Counter 1
switching channel - batch counter
• Counter 2 SSC Main: Counter 2
switching channel - main counter
• Counter 2 SSC Batch: Counter 2
switching channel - batch counter
• Counter 3 SSC Main: Counter 3
switching channel - main counter
• Counter 3 SSC Batch: Counter 3
switching channel - batch counter
• Counter 4 SSC Main: Counter 4
switching channel - main counter
• Counter 4 SSC Batch: Counter 4
switching channel - batch counter
rw
1
[output_state_com_lost] Fallback value if fieldbus connection is
lost
• State off: OFF
• State on: ON
• Keep last: keep last valid value
rw
1
1
Read and write; parameter can only be changed if no active connection to fieldbus controller
To configure the outputs of a port:
Requirements:
ü The parameter setting software has been started.
ü The detailed view of the device is active.
u Select the [io] > [port[n]] > [pin2] (n: 1...4) menu.
w The menu page shows the current settings of the digital output on pin 2 of the port.
u Set the parameters.
u Select menu [io] > [port[n]] > [pin4] (n: 1...4).
w The menu page shows the current settings of the digital output on pin 4 of the port.
u Set the parameters.
u Write the changed values to the device.
w The digital outputs of the device are configured.
Bekijk gratis de handleiding van IFM AL4203, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4203 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7189 MB |
