IFM AL4042 handleiding
Handleiding
Je bekijkt pagina 28 van 58
AL4042 Remote I/O module 16 DI
28
ü The detailed view of the device is active.
u Select [devicetag] menu.
u Enter the application identifier.
u Write the changed values to the device.
w The device can be identified by the selected application tag.
9.1.14 Firmware: Reading the firmware version
Available information:
Parameter Description Value range Access
[version] Firmware version e.g. AL4x4x_fw_md_1.4.0.142 ro
1
1
Read only
Requirements:
ü The parameter setting software has been started.
ü The detailed view of the device is active.
u Select the [Firmware] menu.
w The menu page displays the firmware version of the device.
9.1.15 Firmware: Resetting the device
Requirements:
ü The parameter setting software has been started.
ü The detailed view of the device is active.
u Select the [Firmware] menu.
u Click on [factoryreset].
w The device is reset to factory settings.
w All parameters are set to their default values.
9.1.16 Firmware: Restarting the device
Requirements:
ü The parameter setting software has been started.
ü The detailed view of the device is active.
u Select the [Firmware] menu.
u Click on [Reboot].
w The device will be restarted.
w All set parameter values will be retained.
Bekijk gratis de handleiding van IFM AL4042, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL4042 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4907 MB |
