IFM AL1921 handleiding
Handleiding
Je bekijkt pagina 19 van 135
IO-Link master with EtherNet/IP interface AL1921
19
9 Settings
9.1 Parameter setting software
9.1.1 Supported parameter setting software
For parameterising the IO-Link master and the connected IO-Link devices a parameter setting
software is required.
Supported parameter setting software
• ifmmoneo OS (art no. QMS001) + module licence ifm moneo|configure (art. no. QMP020)
• ifmmoneo|configure free
u For a correct installation: observe the installation instruction for ifm moneo.
u Install the desired parameter setting software.
u Activate the licences required for operation.
w The installed parameter setting software can be used for parameter setting of the device.
9.1.2 Getting started
Requirements:
ü ifm moneo|configure has been installed correctly on the laptop / PC.
ü ifm moneo|configure has been set up.
ü The laptop / PC is connected directly or via a suitable network coupling element (e.g. switch) to an
IoT port (X23) of the device.
u Start ifm moneo.
w The user interface appears.
u Click on the [Configure devices] tile.
w View of [connected devices] appears.
u Scan the network for devices.
Bekijk gratis de handleiding van IFM AL1921, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | IFM |
| Model | AL1921 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11184 MB |
